How do I care for my Customised garments?
Don't leave them scrunched up and damp in a bag for a week before washing them is always a good start! 🙂
Embroidered Designs
Embroidery ring marks are a normal part of the embroidery production process. Although we make every effort to remove them, please note that they will vanish after the first wash.
Caring for custom branded embroidered workwear uniforms involves special attention to maintain the integrity of the embroidery and the fabric. Here are some comprehensive steps to ensure proper care:
Washing Instructions for embroidery
First make sure all pockets are empty, zips are done up and buttons are undone.
1. Turn Inside Out: Turn the garments inside out before washing to protect the embroidery from friction.
2. Cool Water: Wash in cool water (around 30°C or 86°F) to prevent colours from bleeding and fabric from shrinking.
3. Mild Detergent: Use a mild detergent that is free from bleach or other harsh chemicals which can damage the embroidery threads.
4. Gentle Cycle: Select a gentle or delicate cycle on your washing machine to reduce stress on both the fabric and the embroidery.
5. Hand Wash: For the best care, consider hand washing the garments to minimize wear and tear.
Drying Instructions for embroidery
1. Air Dry: The ideal method is to air dry the garments. Lay them flat on a clean, dry towel or hang them to dry. This helps maintain the shape and prevent shrinkage.
2. Avoid Direct Sunlight: Dry the garments in a shaded area to prevent the colours from fading.
3. Avoid Tumble Drying: If using a dryer, choose the lowest heat setting and remove the garments promptly to avoid excessive wrinkles and shrinking.
Ironing Instructions for embroidery
1. Low Heat: If ironing is necessary, use a low heat setting to avoid damaging the embroidery.
2. Protect the Embroidery: Place a thin cloth or towel over the embroidery to protect it from direct heat and to avoid flattening the stitches.
3. Avoid Direct Heat on Embroidery: Never apply direct heat to the embroidered area, as this can damage the threads and the design.
General Tips
1. Avoid Bleach and Fabric Softeners: These products can weaken the embroidery threads and cause colours to fade.
2. Do Not Dry Clean: The chemicals used in dry cleaning can be too harsh for embroidered garments.
3. Store Properly: Store your workwear in a cool, dry place. Avoid folding the embroidered areas to prevent creasing and damage.
4. Spot Clean Stains: For small stains, spot clean with a mild detergent and a soft cloth, focusing on the stained area to avoid unnecessary washing.
5. Check for Loose Threads: Regularly check for loose or frayed threads. Use small scissors to trim them carefully without pulling on the embroidery.
Special Care for Stains
1. Act Quickly: Address stains as soon as possible to prevent them from setting.
2. Blot, Don’t Rub: Gently blot the stain with a clean, damp cloth rather than rubbing, which can push the stain deeper into the fabric.
3. Use a Mild Stain Remover: Apply a mild stain remover that is safe for coloured fabrics, and test it on an inconspicuous area first to ensure it doesn’t affect the embroidery.
By adhering to these care guidelines, you can significantly extend the life of your custom branded embroidered garments, maintaining their professional appearance and durability over time.
DTF Printed Designs
Caring for custom branded Direct-to-Film (DTF) printed uniform is easy, simply follow the guidelines below to maintain the quality and longevity of the prints and the fabric. Here are some detailed steps to caring for your customised garments:
Washing Instructions
First make sure all pockets are empty, zips are done up and buttons are undone.
1. Turn Inside Out: Always turn your garments inside out before washing to protect the DTF print from abrasion.
2. Cool Water: Use cold water (around 30°C or 86°F) to prevent the print from fading and the fabric from shrinking.
3. Mild Detergent: Use a mild detergent without bleach or fabric softeners, as harsh chemicals can damage the print.
4. Gentle Cycle: Wash on a gentle cycle to minimize stress on both the fabric and the print.
5. Avoid Overloading: Do not overload the washing machine, as this can cause excessive friction and damage the prints.
Drying Instructions
1. Air Dry: The best method is to air dry the garments. Hang them up or lay them flat in a shaded area to prevent direct sunlight from fading the prints.
2. Do NOt Tumble Dry.
Ironing Instructions
1. Low Heat: If ironing is necessary, use a low heat setting.
2. Do Not Iron on the Print.
2. Protect the Print: Turn the garment inside out to protect print from direct heat.
3. Avoid Steam: Do not use steam, as the moisture and heat can damage the print.
General Tips
1. Avoid Bleach and Fabric Softeners: These can break down the adhesive of the DTF print and cause fading or peeling.
2. Do Not Dry Clean: The chemicals used in dry cleaning can be too harsh for DTF prints.
3. Store Properly: Store your workwear in a cool, dry place. Avoid stacking heavy items on top of them to prevent creasing and damage to the prints.
4. Spot Clean Stains: For small stains, spot clean with a mild detergent and a soft cloth instead of washing the entire garment.
By adhering to these care guidelines, you can significantly extend the life of your custom branded printed uniform, maintaining their professional appearance and durability over time.
